An invoice has a core set of information that most businesses need to provide. VAT details depend on factors including whether the supplier is VAT registered, the type of supply, the customer’s status and the country whose VAT rules apply.
This checklist is general guidance, not tax advice. UK and EU VAT rules can vary by transaction, so confirm your position with a qualified tax adviser when the treatment is unclear. The checklist separates VAT particulars from the practical information that helps an invoice move through accounts payable (AP) approval and payment.
Key takeaways
Include a unique invoice number, issue date, supplier and customer details, a clear description of the goods or services, the amount charged and any VAT information that applies.
Payment terms, bank details and a purchase order reference are usually operational fields rather than VAT particulars, but they can help AP teams approve and pay invoices promptly.
If you are not VAT registered, do not charge VAT or show VAT as a separate amount. If you are waiting for a VAT registration number, follow HMRC’s rules before showing VAT separately.
VAT invoice requirements vary by transaction. Cross-border supplies require particular care because the treatment can depend on the goods or services, the customer’s status and the place-of-supply rules.
Mismatched totals, incorrect VAT treatment, missing supplier details and absent PO references can all delay approval or payment.
What needs to be on an invoice?
The exact requirements depend on the type of invoice and the transaction. A full VAT invoice generally contains more information than a simplified invoice, and specific rules may apply to reverse-charge, exempt, zero-rated, international or low-value supplies.
The fields below combine common UK and EU VAT particulars with practical information that AP teams often check. GOV.UK provides the baseline for UK invoices, while EU requirements can include national additions. Always check the rules that apply to the transaction rather than treating this list as a substitute for tax advice.
“Invoice” label, good practice: Clearly label the document “Invoice”. This helps the recipient identify and process it, although the word itself is not necessarily a VAT particular.
Unique sequential number, generally required: Use a unique number from one or more consistent series. Each series should remain sequential and identifiable.
Invoice date, generally required: Show the date the invoice was issued.
Supply date or tax point, required where applicable: Show the date the goods or services were supplied when it differs from the invoice date, or where the applicable VAT rules require a tax point.
Supplier details, generally required: Show the supplier’s legal or trading name and address. Include the VAT registration number when the supplier is VAT registered and the transaction requires it.
Customer details, generally required: Show the customer’s name and address. Include the customer’s VAT number where the applicable VAT treatment requires it, such as certain reverse-charge transactions.
Line-item detail, generally required on full VAT invoices: Describe the goods or services supplied. Include quantities, unit prices, discounts and amounts where relevant.
Net amount, required where VAT is charged: Show the amount before VAT, including subtotals where different VAT rates or treatments apply.
VAT breakdown, required where VAT is charged: Show the applicable VAT rate and amount for each relevant rate, together with the total VAT charged. For UK VAT, the VAT amount generally needs to be shown in sterling.
Total payable, essential: State the total amount due and make sure it reconciles with the line items, VAT and any discounts.
Currency, good practice: State the currency clearly, particularly when the invoice is issued in a currency other than the supplier’s usual currency.
Payment terms and due date, good practice: Explain when payment is due and how the due date has been calculated.
Bank details, good practice: Include the account details needed for payment. For international payments, this may include the IBAN and BIC.
Purchase order reference, good practice: Include the customer’s PO number when one exists. This helps the AP team match the invoice to the approved purchase.
Payment terms, bank details and PO references can be important for processing, but they are not automatically VAT particulars. Conversely, an invoice can be operationally complete while still using the wrong VAT treatment.
UK and EU invoice requirements compared
UK and EU rules share many common invoice fields, but the correct treatment depends on the transaction. EU member states can also introduce national requirements in addition to the common VAT rules.
Dimension | UK | EU |
|---|---|---|
When a VAT invoice is required | Depends on the type of supply and the customer’s status. VAT-registered businesses generally issue VAT invoices for taxable supplies to VAT-registered customers, subject to exceptions. | Depends on the type of transaction, the customer’s status, the place of supply and the member state’s rules. |
Numbering | Use a unique number from one or more consistent series. | Use a unique number or series in accordance with the applicable national rules. |
Dates | Show the issue date and, where relevant, the time of supply or tax point. | Show the issue date and the supply date where it differs or is required. |
Supplier VAT number | Include it where the supplier is VAT registered and the transaction requires a VAT invoice. | The supplier’s VAT identification number is generally shown on a VAT invoice, subject to simplified-invoice rules. |
Customer VAT number | Required in specific situations, including certain reverse-charge transactions. Northern Ireland and EU goods transactions may have additional requirements. | Generally required where the customer is liable for the VAT, including relevant reverse-charge transactions. |
VAT currency | When UK VAT is charged, show the VAT amount in sterling. | Check the rules of the member state responsible for taxing the transaction. |
Reverse charge | State that the reverse charge applies where relevant. | Use the wording “Reverse charge” where required by the applicable EU rules. |
Exempt or zero-rated supplies | Show the applicable treatment and any required reference or explanation. | Include the applicable exemption or special-scheme reference where required. |
Simplified invoices | Reduced requirements may apply to qualifying low-value invoices. | Simplified-invoice rules and thresholds vary by member state. |
Additional identity fields | Company and sole-trader disclosure requirements apply. | National company and tax requirements may add further fields. |
The table is a starting point, not a cross-border decision tree. For international supplies, check the goods or services, the customer’s status, the place-of-supply rules, the applicable VAT rate or exemption and whether reverse charge applies.
Extra fields for sole traders, limited companies and VAT-registered businesses
Your legal form affects the identity information on the invoice. Your VAT status affects the tax information. These requirements can overlap.
Sole traders
A sole trader should generally show their own name and any business name they use, together with an address for business correspondence or legal documents. A sole trader should not present the business as a limited company, limited liability partnership or public limited company. Terms such as “Ltd”, “LLP” or “plc” should not be used in a way that misrepresents the business’s legal form.
Limited companies
A limited company should show its full registered name as it appears on the certificate of incorporation. If directors’ names are included on the invoice, the names of all directors should be shown. Many businesses also include their company registration number and registered office address so that the customer’s supplier records are complete.
VAT-registered businesses
If a business is VAT registered and the transaction requires VAT to be charged, the invoice should include the supplier’s VAT registration number and the applicable VAT rate and amount. Not every transaction uses the standard VAT treatment. Zero-rated, exempt and reverse-charge supplies need to be treated according to the rules that apply to the transaction. Do not add ordinary VAT simply because the business is VAT registered. A valid VAT invoice is normally the main evidence a customer uses when reclaiming input VAT. Businesses should keep the required VAT records and check whether any special rules or alternative evidence apply to the transaction.
Businesses waiting for a VAT registration number
Do not show VAT as a separate amount on invoices until the VAT registration number has been received. Once the number is available, HMRC requires the necessary VAT invoices to be issued within the relevant time limit. If your effective registration date is earlier than the date you receive your VAT number, take professional advice on how to correct or reissue affected invoices.
An example invoice
The example below shows the information commonly included on a UK VAT invoice. The legal requirements depend on the transaction, so the labels should be adapted where a different VAT treatment applies.
INVOICE
Invoice number: 2026-OAK-0042
Invoice date: 15 October 2026
Supply date: 30 September 2026
PO reference: PO-4471
FROM:
Harbour Analytics Ltd
12 Quay Street
Bristol BS1 4DB
VAT number: GB 123 4567 89
TO:
Oakfield Retail Ltd
Unit 3, Riverside Park
Leeds LS10 1AB
Description Qty Unit price Net amount VAT rate
Data migration consulting 10 £650.00 £6,500.00 20%
Reporting licence, one year 1 £1,200.00 £1,200.00 20%
Subtotal excluding VAT: £7,700.00
VAT at 20%: £1,540.00
Total due: £9,240.00
Payment terms: 30 days from invoice date
Due date: 14 November 2026
Bank: Harbour Analytics Ltd
Sort code and account number: [details]
IBAN and BIC: [details where relevant]Before sending the invoice, check that:
the net line items add up to the subtotal;
the VAT amount matches the applicable rate;
the total due equals the net amount plus VAT and any adjustments;
the supplier and customer details are correct;
the invoice number has not been used before; and
the VAT treatment matches the transaction.
How to number invoices so each one stays unique
A practical convention is to use the year, a customer or business code and a sequence number, such as 2026-OAK-0042.
You can use letters and numbers, and you can start a series at a number that suits your business. The important point is that each invoice is uniquely identifiable and that the sequence is consistent. If you use separate series for different business units, locations or invoice types, keep each series controlled and explain how it works. Do not delete cancelled or spoiled invoices simply to remove a number from the sequence. Keep the relevant records and document the reason for the cancellation or gap. Credit notes should have their own identifying number and should refer to the original invoice where appropriate.
Common invoice errors that delay approval or payment
Many invoice problems are operational rather than legal, but they can still delay payment.
Missing or duplicated invoice number: AP teams may be unable to file the invoice or check it for duplicates.
Incorrect VAT treatment: The supplier may have used the wrong rate, charged VAT when reverse charge applies or shown VAT before receiving a VAT registration number.
Missing PO reference: Some buyers will hold or return an invoice without a valid PO number.
Incomplete bank details: The invoice may be approved but payment delayed while the AP team confirms the supplier’s account details.
Mismatched totals: The line items, subtotal, VAT and total payable should reconcile.
Wrong entity billed: The invoice may need to be corrected if it is addressed to a group company rather than the legal entity that bought the goods or services.
Missing supply date: The AP team may need the tax point to determine the correct VAT treatment or reporting period.
Missing supplier details: Incomplete names, addresses or VAT numbers can delay supplier verification.
Unclear currency: Make the invoice currency visible wherever there is a risk of confusion.
A PO reference or bank detail may not be a VAT requirement, but missing operational information can still stop an invoice from being paid.
Keeping invoice data clean for capture, matching and reconciliation
An incomplete invoice often ends up in an AP review queue while the team contacts the supplier for clarification. Clear, structured invoice data can reduce manual re-keying and make exceptions easier to manage. Spendesk is a spend management platform that brings together company cards, expense management, accounts payable, procurement and budgeting. Depending on the configuration, your finance team can use Spendesk automation to:
extract invoice information such as the supplier name, invoice number, dates and VAT amounts for review;
flag potential duplicate invoices;
support two- or three-way matching against a purchase order and goods-received information;
route exceptions for review when the captured data does not match the expected information; and
help finance teams review suggested GL codes and VAT fields before approval.
Automation supports invoice processing, but it does not replace the need to confirm the supplier, transaction, VAT treatment and approval requirements. See how your AP team can manage exceptions through connected invoice workflows. Your finance team can also maintain a template based on this checklist and update it when the applicable rules or internal requirements change. Book a Spendesk demo to see how your team can take an invoice from capture to reconciliation with less manual re-keying.
Frequently asked questions
How do you write a simple invoice without VAT?
Include a unique invoice number, the invoice date, your name and address, the customer’s name and address, a clear description of the goods or services, the amount charged and the total due.
Add payment terms, a due date and bank details to make payment easier. Do not show a VAT charge if you are not VAT registered or if the transaction does not require VAT to be charged.
The exact requirements can vary by business type, transaction and country, so check the applicable rules if the invoice is for an international customer or a special VAT treatment.
When is a VAT invoice required?
In the UK, the requirement depends on the type of supply and the customer’s status. VAT-registered businesses generally issue VAT invoices for taxable supplies to VAT-registered customers, but exceptions can apply to zero-rated, exempt, simplified or special-scheme transactions.
EU requirements depend on the transaction, the customer’s status, the place of supply and the rules of the relevant member state. Do not assume that one VAT-invoice template is correct for every sale.
What should you do if you are waiting for a VAT registration number?
Do not show VAT as a separate amount until you have received your VAT registration number. Once the number is available, follow HMRC’s requirements for issuing or correcting invoices relating to the effective registration period.
If the timing affects a customer’s VAT reclaim or a large number of invoices, ask a qualified tax adviser for guidance.
What changes when you invoice an overseas client?
Do not determine the VAT treatment from the customer’s country alone. Check:
whether you are supplying goods or services;
whether the customer is a business or consumer;
where the supply is treated as taking place;
whether the customer’s VAT number is required;
whether reverse charge applies;
whether the supply is taxable, exempt, zero-rated or outside the scope of UK VAT; and
which currency and wording the applicable rules require.
For international transactions, confirm the treatment with current HMRC guidance, the relevant EU member-state rules or a qualified tax adviser.
Curious how Spendesk works?
Try an interactive demo to see spend control and approvals end-to-end.
Get a free tour)
)
)
)
)
)
)